See what our customers say about working with us:
"Sigh of relief!!! MRG runs a top notch business. I'll be looking for parts to arrive. Thanks!"
David O.
January 2026
David O.
January 2026
"MRG has been a fantastic supplier. There is no way we would have made our commitments to our customers without MRG's help and flexibility. Customer service is 2nd to none."
Paul W.
January 2026
Paul W.
January 2026
"If I don't take the time to say this as we get close to the end of year, I want to thank you and everyone at MRG for all the work you do with us and for us. We appreciate your service a great deal."
Tom R.
December 2025
Tom R.
December 2025
"Thank you for this information, you have been extremely helpful. By you guys raising your hand when it didn't seem right, we were able to contain this issue to one part and then immediately pursue corrective action, which we greatly appreciate."
Logan M.
October 2025
Logan M.
October 2025
"Awesome. Thank you for the quick turnaround on this. We will be sending some more machining work to you in the next day or so as well. We appreciate the help!"
Kim A.
October 2025
Kim A.
October 2025
"First, thank you to MRG for supporting this urgent need. It is very much appreciated!!"
Loren N.
October 2025
Loren N.
October 2025
"Thanks again for hosting us yesterday, it was a great tour and your portfolio of capabilities is impressive. We are eager to explore some opportunities with you very soon."
Luke G.
August 2025
Luke G.
August 2025
"The balance of the units shipped 03/28. MRG did an outstanding job!!! Our customer is testing the assembled unit early next week. Following the test results, we shall learn follow-up order(s). Thanks for the solid performance!"
Tom K.
April 2025
Tom K.
April 2025
"Keep being a great supplier to us! 7 out of 7 orders delivered on time."
Jenny M.
April 2025
Jenny M.
April 2025
"Thank you guys for helping to make these work for our company; it will go a long way for future business too."
Gene W.
April 2025
Gene W.
April 2025
"I wanted to let you guys know that this last batch of parts was the best we have seen so far. I didn't see any indications during incoming inspection. Thanks to you and your team who have definitely been working hard to increase quality and production."
Frank W.
April 2025
Frank W.
April 2025
"Awesome job on the feed throat overlay welding MRG Team!!"
Corey D.
March 2025
Corey D.
March 2025
"Also, thank your team for us as the bolster plate turned out really well and we are super happy with the results."
Kevin K.
February 2025
Kevin K.
February 2025
"Thank you for the GREAT work as always!"
Chad
January 2024
Chad
January 2024
"Really appreciate your guys' help on this. As always you did a fantastic job! Very much appreciated!"
Jason
November 2023
Jason
November 2023
"Thank you for giving us the tool rundown today; I was very pleased with how it turned out.
We look forward to getting it into production."
Joey
November 2023
We look forward to getting it into production."
Joey
November 2023
"This part is pretty much perfect. The assembly technicians that work with this part performed a first-pass functionality test and the results were an order of magnitude better than what they are used to."
Max
August 2023
Max
August 2023
"I really appreciate you taking the time out of your day to give me a tour of your facility. I'm very impressed with the capabilities available and the cleanliness of the shop."
Evan
June 2023
Evan
June 2023
"You guys have been amazing to work with through the years and very helpful early on when we had to make some changes to our . . . design."
Brooke
September 2022
Brooke
September 2022
"Hey Karl!
I wanted to give you an update on the . . . machine. It’s been up and running out on the floor for a while now and things have been working great! The operators are big fans of this machine, great improvement over the previous process of assembling them by hand.
Thank you to you and the entire MRG team for your help on this project!
Mary – Special thanks to you for helping me out . . . . I appreciate you working with me!"
Ryan
September 2022
I wanted to give you an update on the . . . machine. It’s been up and running out on the floor for a while now and things have been working great! The operators are big fans of this machine, great improvement over the previous process of assembling them by hand.
Thank you to you and the entire MRG team for your help on this project!
Mary – Special thanks to you for helping me out . . . . I appreciate you working with me!"
Ryan
September 2022
"You guys are doing great! We appreciate everything MRG is doing. We have seen non-forecasted growth and extraordinary increase in sales. Whatever you can do for us is much appreciated."
Shawn
August 2021
Shawn
August 2021
"I just want to thank all involved on this project! The workmanship and fast turn around to completion has been above and beyond expectation! We look forward to projects in the future!"
Kyle
November 2020
Kyle
November 2020
"Mary... Just wanted to let you know we ran parts in the new form die and they are perfect!
My Engineering Director is ecstatic!
Thank you very much.
Laura"
March 2019
My Engineering Director is ecstatic!
Thank you very much.
Laura"
March 2019
"Good afternoon MRG-
I spoke with Ben this morning about the stroke width of the “new” characters. His concern was about the size of characters with existing customers.
Sales and Marketing have that wrapped up. They have contacted the customers and let them know to order custom from us or to convert to the new size. Thankful of your concerns and be assured that we have taken care of that on our end.
You’re a great bunch of People"
January 2019
I spoke with Ben this morning about the stroke width of the “new” characters. His concern was about the size of characters with existing customers.
Sales and Marketing have that wrapped up. They have contacted the customers and let them know to order custom from us or to convert to the new size. Thankful of your concerns and be assured that we have taken care of that on our end.
You’re a great bunch of People"
January 2019
"...... That being said, I appreciate your honesty with these issues. Many vendors would just send it as is and cross their fingers and hope that it works. It goes to show that you and your organization are honest and really trying to deliver perfection...." Ben
He is absolutely right! Thank you!!
Regards,
Ross"
December 2018
He is absolutely right! Thank you!!
Regards,
Ross"
December 2018
"Greetings , just an FYI concerning MRG. They specialize in one off proto parts, production fixturing, CNC machining , Water jet cutting for heavy plate to at least 40mm, and they have inspection capabilities using the FARO Arm and Polyworks software. They’ve made this approx. $50,000 purchase at our urging. Of all the suppliers I’ve worked with here going back 20+ years, they, without question, are the best supplier I’ve worked with. They don’t hesitate to contact us with any question and our relationship with them should be the example for all our external suppliers. They’ve proven themselves by virtue of their quality of product and conduct. Thanks for your attention.
Sincerely, JAM"
May 2014
Sincerely, JAM"
May 2014
"Hi Rebecca
I wanted to pass along the following from us on the parts that we received Friday.
They wanted me to pass along to everyone @ MRG that you all did an Outstanding job-parts were clean, organized, and identified very well. We are very thankful and pleased of the fine job you did for us.
Again Thank You to you and all @ MRG. Have a good day!
Sincerely,
Kris"
October 2014
I wanted to pass along the following from us on the parts that we received Friday.
They wanted me to pass along to everyone @ MRG that you all did an Outstanding job-parts were clean, organized, and identified very well. We are very thankful and pleased of the fine job you did for us.
Again Thank You to you and all @ MRG. Have a good day!
Sincerely,
Kris"
October 2014
"All at MRG
Thanks for doing such great work on the Pod Top 1st shot mold! The sample yesterday went extremely well - it was great to see the fine detail of the part come off in the first sample of the mold. I know that only attention to detail in the steel results in the plastic parts that look this good. I value your skills and dedication. You all did a great job on a difficult part and on a short timeline.
Thanks again"
Joe
November 2013
Thanks for doing such great work on the Pod Top 1st shot mold! The sample yesterday went extremely well - it was great to see the fine detail of the part come off in the first sample of the mold. I know that only attention to detail in the steel results in the plastic parts that look this good. I value your skills and dedication. You all did a great job on a difficult part and on a short timeline.
Thanks again"
Joe
November 2013